Page 232 - Demo

230BRIDAL | CLIQ®USING YOUR CLIQ®To open/close rings there is no need to handle the latch and doing so may bend the latch out of shape. Just follow these instructions and allow the latch to do it's job!Hold stylus near tip. Press straight into dimple.Pull top and bottom shank apart. Wrap around base of fingerand squeeze until \To remove, palm side up to center dimple. Hold stylus near tip and press.HOW TO ORDER A CLIQ® PEG SETENGAGEMENT RINGCHOOSE SIZE: By using plastic sizers - split each one to separate over knuckle and spring back to size at base of the finger.ORDER: Appropriate shank in desired size and width.STYLUSFree with purchase of any CLIQ® shank.Die StruckStyle (Eng) Prongs Holds (mm) PriceWG122-9 4-Prong Medium w/peg 5.0mm $121WG152-9 6-Prong Low w/peg 5.0mm $127WG151-9 6-Prong High w/peg 5.0mm $145Die StruckStyle (Eng) Prongs Holds (mm) PriceWG2624-5 4-Prong TruSeat® w/peg 5.0mm $209WG180-7 V-End w/peg 5.0mm $168Die StruckStyle (Eng) Prongs Holds (mm) PriceWG240-8 Straight Prong w/peg 7x5mm $164WG242-5 5 Prong V-End w/peg 8x5mm $163Die StruckStyle (Eng) Prongs Holds (mm) PriceWG5158-5 4-Prong Tapered w/peg 7x5mm $151WG217-8 6-Prong w/peg 7x5mm $179Die StruckStyle (Eng) Prongs Holds (mm) PriceWG208-4 4-Prong w/Peg 7x5mm $177WG210-4 4-Prong w/Peg 7x5mm $183Die StruckStyle (Eng) Prongs Holds (mm) PriceWG258-10 6-Prong w/peg 10x5mm $177WG259-9 6-Prong V-End w/peg 10x5mm $255OvalMarquiseEmeraldRoundPrincessPearCOMPATIBLE HEADS TO USE WITH CLIQ® RINGS